For a watertight finish to tiling.

Foby+ Waterdichtsysteem consists of Foby+ Afdichtpasta, Foby+ Afdichtband and a block wiper. The system is used to waterproof bathrooms before tiles are affixed. Once dry, Foby+ Waterdichtsysteem forms an elastic waterproof membrane which can be safely tiled over.

Waterproofing of corner joints, pipe penetrations and drainage holes in bathrooms. Especially recommended for water-sensitive building materials such as gypsum and plasterboard walls and waterproof plywood floors. Limitations: For indoor use only.

Foby+ Afdichtpasta adheres to almost all stony and wooden substrates. The substrate must be clean, dry and free of grease and dust. The paste is applied with the enclosed brush. Apply Foby+ Afdichtband evenly into the still wet Foby+ Afdichtpasta at corner connections, cracks, around drains and pipe penetrations. Apply to the substrate in such a way that the sealing tape is completely seated in the sealing paste. Then coat the tape again with sealing paste so that the tape is no longer visible. When tiling a waterproof plywood floor, apply Foby+ Afdichtpasta to the entire floor to make it watertight. After drying for 24 hours the tiling can be carried out. Clean tools with water. Bond the floor tiles with Foby+ Flexmortel. Do not comb the adhesive down to the substrate! Tile the walls using Foby+ Copyflex. Grout the entire tiled surface using Foby+ Univoeg. Finally, seal all corners using Foby+ Silicone NO.

Processing temperature: from +5°C to +35°C (substrate and ambient temperature). Optimal application temperature is between +5°C and +25°C. Drying time: 24 hours. Consumption for 12m of sealing tape: 5kg. Consumption with a layer thickness of 1mm: Approx. 1.5kg. Coverage (1mm) with 5kg: 15-25m2. Shelf life: Minimum 12 months if left unopened and stored in dry conditions. After opening, the shelf life is limited. Packaging: Buckets with 5 kg Foby+ Afdichtpasta, 12 metres Foby+ Afdichtband and a block wiper.

Eurovite Nederland BV guarantees that its product, within the stated shelf life, is in accordance with the specifications. The liability shall never exceed the provisions of our Terms and Conditions of Delivery. In no event shall Eurovite Nederland BV be liable for any consequential damages. It is the responsibility of the user to determine the suitability of the product for the intended application by means of their own tests. This Foby+® quality product is exclusively produced by Eurovite Nederland BV.