Primer for non-porous substrates.

Foby+ Hechtbrug is a ready-to-use red-pigmented primer based on a synthetic resin dispersion. Foby+ Hechtbrug is for use with non-porous substrates.

Foby+ Hechtbrug can be applied on surfaces which cannot receive a finishing coat directly, because the surface is not porous enough, has too little penetration capacity or is too smooth. Foby+ Hechtbrug forms a bonding bridge between substrate and the finishing coat. Foby+ Hechtbrug can be applied both indoors and outdoors

Foby+ Hechtbrug must be applied undiluted. Stir before use. Apply Foby+ Hechtbrug to the substrate with a brush, roller or sprayer. For indoor applications, stir Foby+ Hechtbrug well and apply thinly and evenly. For exterior applications, mix Foby+ Hechtbrug with 20% (weight) cement and apply within 1 hour. Allow to dry for approx. 3 hours, after which the further processing can be carried out.

Processing temperature: from +5°C to +25°C (substrate and ambient temperature). Mixing ratio: Use undiluted for indoor applications. For external applications, mix with 20% (by weight) of cement. Colour: Red. Shelf life: Minimum 6 months if left unopened and stored in dry conditions. After opening, the shelf life is limited. Coverage: Approx. 4 m2 per kg (depending on the substrate). Packaging: 5 kg bucket.

Eurovite Nederland BV guarantees that its product, within the stated shelf life, is in accordance with the specifications. The liability shall never exceed the provisions of our Terms and Conditions of Delivery. In no event shall Eurovite Nederland BV be liable for any consequential damages. It is the responsibility of the user to determine the suitability of the product for the intended application by means of their own tests. This Foby+® quality product is exclusively produced by Eurovite Nederland BV.