Flexible powdered tile adhesive.

Foby+ Interflex Pro is an elastic powdered tile adhesive and, after adding water, a ready-to-use, thin-bed mortar that sets hydraulically. Foby+ Interflex Pro is suitable for substrates (indoors) that are subject to slight movement or action due to the addition of various additives. The product is easy to process and has high initial and final adhesion. Because of its good workability and high flow resistance properties, it is extremely suitable for bonding large format wall and floor tiles to the wall. Foby+ Interflex Pro is available in grey and white variants.

Foby+ Interflex Pro is suitable for bonding ceramic wall and floor tiles (including porcelain stoneware) and (glass) mosaics to stone and plaster-like substrates. The use of Foby+ Interflex Pro is particularly suitable for use:

  • In project-based tiling adhesion.
  • On substrates that are subject to temperature variations such as with floor heating.
  • For bonding over old tile layers.
  • Large format wall and floor tiles for use on walls.

Due to the risk of discolouration, Foby+ Interflex Pro is not suitable for bonding glass mosaics and light-coloured natural stone. Use Foby+ Interflex Pro wit for this.

Foby+ Interflex Pro is mixed with clean tap water in a clean mixing tub to produce a smooth, sturdy mass. 25 kg of powder is sprinkled into 6 to 7 litres of water and mixed with a mixing drill. After allowing to set for approximately 5 minutes, mix the mortar once again vigorously. The mixture is now ready and has an application time of approximately 4 hours. Apply the adhesive to the substrate with a tile trowel with rectangular notches, at least 80% of each tile should be covered with adhesive. Press the tiles into the fresh adhesive with a sliding motion. With floor heating, follow the manufacturer’s instructions regarding commissioning. Also consult the guidelines in the manufacturer's documentation. Residual adhesive must immediately be removed using a damp cloth and tools must be rinsed with water.

Mixing ratio: Add 25kg of powder to 6 to 7 litres of water. Processing time: approx. 4 hours. Open time: Approx. 30 minutes. Processing temperature: from +5°C to +25°C (substrate and ambient temperature). Curing: Can be walked on after a minimum of 24 hours. Can be grouted after a minimum of 24 hours. Shelf life: Minimum 12 months if left unopened and stored in dry conditions. Packaging: 25kg bag Consumption 2-5 kg/m2.

Eurovite Nederland BV guarantees that its product, within the stated shelf life, is in accordance with the specifications. The liability shall never exceed the provisions of our Terms and Conditions of Delivery. In no event shall Eurovite Nederland BV be liable for any consequential damages. It is the responsibility of the user to determine the suitability of the product for the intended application by means of their own tests. This Foby+® quality product is exclusively produced by Eurovite Nederland BV.