Waterproof, flexible jointing mortar for wall and floor tiles.

Foby+ Univoeg is a premixed, cement-based jointing mortar for joints in ceramic wall and floor tiles that cures quickly. The addition of plastics makes the product waterproof and permanently flexible.

Foby+ Univoeg can be used for joint widths of from 1mm to 10 mm. Foby+ Univoeg is highly suitable for:

  • walls and floors.
  • indoors and outdoors.
  • damp areas.
  • critical substrates such as underfloor heating systems and wooden floors.

For grouting floor tiles in dry air in combination with high temperatures or strongly absorbent substrates or tiles, moisten the grout immediately before grouting. Mix 30 kg of Foby+ Voegenbreed with about 8 litres of clean tap water in a clean mixing tub. Use a floor squeegee to draw the thin liquid mass into the joints. After a few minutes, generously sprinkle powdered Foby+ Voegenbreed over the floor. This absorbs the excess moisture from the joints. Then use the floor squeegee to clean the floor diagonally. After some time, clean the floor with a sponge and clean water.

For grouting the wall tiles, prepare a smooth mortar by mixing 30 kg with 6 litres of water. Moisten the joints beforehand to prevent the jointing mortar from drying too quickly. Apply jointing mortar to the joints using a rubber spreader or float. After the joint has dried slightly, sponge off with clean water.

Avoid exposure to draughts or sunlight during application and curing. For the first several days after the application, we recommend keeping the joints moist by sponging or mopping. This ensures proper and full curing. In hot weather, always take into account that the material may dry too quickly, which may lead to insufficient strength development.

Mixing ratio: Add 100 g powder to 22g to 24 g of water. Processing temperature: from +5°C to +25°C (substrate and ambient temperature). Processing time: Approx. 40 minutes (depending on temperature). Can be walked on: after Approx. 5 hours. Cured after: Approx. 24 hours. Shelf life: At least 12 months if stored unopened, in a dry, frost-free place and protected from high temperatures. Packaging: 5 kg bag Conforming to CG2WA (in accordance with NEN-EN13888). Consumption: 0.5 - 1 kg/m2 (depending on tile size, joint width and joint depth).

Eurovite Nederland BV guarantees that its product, within the stated shelf life, is in accordance with the specifications. The liability shall never exceed the provisions of our Terms and Conditions of Delivery. In no event shall Eurovite Nederland BV be liable for any consequential damages. It is the responsibility of the user to determine the suitability of the product for the intended application by means of their own tests. This Foby+® quality product is exclusively produced by Eurovite Nederland BV.